1.Identify the Front Stabilizer (2). While another person lifts the front of the Frame (1) slightly, attach the Front Stabilizer to the Frame with two M10 x 75mm Carriage Bolts (48) and two M10 Nylon Locknuts (44).
2.Orient the Frame Rail (3) as shown. Attach the Rear Stabilizer (5) to the Frame Rail with two M10 x 80mm Button Bolts (49) and two M10 Split Washers (43).
3.Locate the Seat Knob (not shown) on the Seat Carriage (4). Turn the Seat Knob counterclockwise two or three turns to loosen it. Next, pu!l the Knob, slide the Seat Carriage onto the Frame Rail (3), and then release the Knob. Make sure that the Seat Carriage is oriented as shown. Move the Seat Carriage back and forth slightly until it locks into position. Then, tight- en the Knob.
Slide the Frame Rail (3) onto the indicated round tubes on the Frame (1). Attach the Frame Rail with two M10 x 52mm Button Bolts (42), two M10 Split Washers (43), and two M10 Nylon Locknuts (44).
4. Attach the Seat (10) to the Seat Frame (6) with three | 4 | |
M6 x 16mm Screws (37). | ||
| ||
Press the Seat Endcap (56) into the Seat Frame (6). |
|
2
5
49
42
44 4
37
