ProForm 831.28317 Assembly, M6 Flat M10 Split, MIO x 75mm Carriage Bolt, MIO x 80mm Button Bolt

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack- ing materials. Do not dispose of the packing materials until assembly is compTeted.

In addition to the included	allen wrenches, assembly	requires	a phillips screwdriver _,	an
adjustable wrench _:_::_,	and a rubber mallet	C	_-_
			L_J

As you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page

14.The second number refers to the quantity used in assembly. Note: Some small parts may have been pre- assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M4x	16mm	M6 x 16mm	M6 Flat	M10 Split	MIO Nylon
Screw	(40)-5	Screw (37)-5	Washer (38)-1	Washer (43)-8	Locknut (44)-6
					D
	M6 x 53mm			M10 x 66mm Button Bolt (47)-4
	Screw	(30)-1

MIO x 52mm Button Bolt (42)-2 MIO x 75mm Carriage Bolt (48)-2

MIO x 80mm Button Bolt (49)-2

4