6
2. Identify the Front Stabilizer (17), which has Wheels
(25) on the ends.
Hold the Front Stabilizer (17) against the saddle on
the front of the Frame (15). Attach the Front
Stabilizer with two M8 x 90mm Carriage Bolts (30)
and two M8 Nylon Locknuts (21).
Attach the Rear Stabilizer (not shown) in the same
manner.
1. Carefully slide the Handlebar Post (14) onto the
Frame (15). Be careful to avoid pinching the
wires inside the Handlebar Post. Attach the
Handlebar Post with three M10 x 25mm Button
Screws (8) and three M10 Split Washers (41).
1
2
17
25
25
15
30
21
14
88
8
41
15
41
14
41
41
60
8
3
5
3. Insert the Pulse Grip Wires (60) through the holes in
the Handlebar Post (14) as shown. Attach the
Handlebar (5) to the Handlebar Post with two M10 x
25mm Button Screws (8) and two M10 Split
Washers (41). Be careful to avoid pinching the
wires inside the Handlebar and Handlebar Post.
ASSEMBLYPlace all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.
Assembly requires the included allen wrench , a phillips screwdriver and two
adjustable wrenches .