ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included allen wrench and your own adjustable wrench

and

scissors

.

 

1. Refer to the drawing on page 4 and identify the left

1

92

 

 

side of the treadmill. With the help of a second person,

93

 

 

 

carefully lay the treadmill on its left side.

 

 

 

 

 

 

70

 

 

 

 

Firmly slide an Extension Leg (99) into each side of the

 

 

 

 

Base (70) as shown. Make sure that the Extension Legs

 

 

 

99

are turned so the Base Pads (89) are on the indicated

 

 

 

89

sides. Using the included Allen Wrench (92), attach each

 

 

 

 

 

 

 

Extension Leg with an Extension Screw (93).

 

 

 

 

With the help of a second person, carefully raise the

 

 

 

 

treadmill to the vertical position so both Extension Legs

 

 

 

 

(99) are resting flat on the floor.

 

 

 

 

 

 

 

 

99

 

 

 

93

89

 

 

 

 

2. Remove the indicated Screws (4) from the treadmill.

2

 

 

 

 

 

 

 

Attach the plastic Catch (5) to the Frame (1) with one

 

70

 

 

Screw (4).

 

 

 

 

 

 

 

Without removing the tape from the Latch Bracket (60)

 

 

60, 66

 

 

 

 

 

and Latch Spacer (66), hold them against the left

4

4

5

 

Upright (70) as shown. Attach the Latch Bracket and

 

 

 

 

 

 

Latch Spacer with four Screws (4). Make sure that the

 

 

 

 

Screws are tight, but do not overtighten them; if the

 

 

66

 

Screws are overtightened, the storage latch will not

 

 

 

 

 

1

68

slide smoothly. Remove the tape.

 

 

 

Note: The inset drawing shows how the Latch Bracket

 

 

 

 

(60), Latch Springs (68), Storage Latch (69), and Latch

 

 

 

 

Spacer (66) fit together.

 

 

60

69

 

 

 

3. See HOW TO LOWER THE TREADMILL FOR USE on

3

 

 

 

page 21. Follow the instructions on page 21 to lower the

 

 

 

 

 

Shipping

 

treadmill.

 

 

 

 

 

 

Ties

 

Cut the two shipping ties from the Right and Left

 

 

 

 

Handrails (72, 73).

 

 

73

 

 

 

 

72

 

5

Page 5
Image 5
ProForm 831.297780 user manual Assembly