To use
To use
mill to your VCR or TV. To do this, follow steps A to C below.
A. Plug one end of the in- cluded audio cable into the jack near the treadmill power cord.
Audio J_
Cable
A. Plug one end of the in- cluded audio cable into the jack near the tread- mill power cord.
i
Audio _
B. To connect the treadmill to a VCR, plug the other end of the audio cable into the included adapter and plug the adapter into
an AUDIO OUT jack on the VCR.
o, ,j
B. To connect the tread- mill to a home stereo, plug the other end of the audio cable into the in- cluded adapter and plug the adapter into a LINE OUT or an AUDIO OUT
jack on the stereo.
C. To connect the tread- mill to a portable
stereo, plug the other end of the audio cable
into e LINE OUT or an
AUDIO OUT jack on the portable stereo.
D. To connect the tread-
mill to e computer, plug the other end of the audio cable into a LINE OUT or an AUDIO OUT jack on the computer.
o+, j
Audio._l
Cable V
I.==o I
+
Audio I_
Cable _7
Audio _
[ I
Cable V
Cable V
C. To connect the tread- mill to a TV, plug the other end of the audio cable into the included adapter and plug the adapter into an AUDIO OUT jack on the TV.
Cable V
Note: If your VCR is connected to a home stereo, you may connect the audio cable to the home stereo as descdbed in step B at the left. Remember, you must
be able to listen to the audio through speakers or headphones in order to use
When the audio cable is properly connected, make
sure that the on/off switch near the treadmill power cord is in the on position. Next, make sure that the
power cord is properly plugged in. Follow the steps below to use an
Note: Depending on the model of your stereo or com-
puter, the jacks may be labeled differently. You may need to connect the audio cable to a SPEAKER jack or
a HEADPHONE jack. To do this, you must purchase a
CD's or videos.
DInsert the key fully into the console,
When the key is inserted, the four dis- plays and various indica- tors on the console will I_ght.
/2.