7. Thread a Handrail Bolt (15) with a Handrail Washer (16) |
| 7 | |
into the right Upright (14) and the Right Handrail (32). | Do | ||
| |||
not tighten the Handrail Bolt yet. |
| 15 | |
Attach the lower end of the Right Handrail (32) to the |
| 16 | |
|
| ||
Extension Leg (41) with a 3 1/2” Handrail Bolt (89), a 3/8” | 32 | ||
Washer (61), and a Flange Nut (57). |
| 14 | |
|
| ||
Tighten all parts used in this step and in step 2. |
|
| |
|
| 41 | |
|
| 57 | |
|
| 61 | |
|
| 89 | |
8. Attach the Storage Latch (12) to the left Upright (14) with |
| 8 | |
two 1/2” Screws (13). Be careful not to overtighten the |
| ||
|
| ||
Screws. |
|
| |
|
| 14 | |
|
| 13 | |
|
| 12 | |
9. Remove the backing from the Adhesive Clip (74). Press |
| 9 | |
the Adhesive Clip onto the base of the Uprights (14) in |
| ||
|
| ||
the indicated location. Press the Allen Wrench (73) into |
|
| |
the Adhesive Clip. |
| 14 | |
|
| ||
|
| 73 | |
|
| 74 |
10.Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill. Note: Some hardware may be left over after assembly is completed.
7