ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•To hire an authorized service technician to assemble the weight bench, call
•Assembly requires two persons.
•Make sure that there is enough clearance to walk around the weight bench as you assemble it.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
In addition to the included hex key and grease packet, the following tools (not included) are required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
Assembly will be more convenient if you have a socket set, a set of
1.
Before beginning assembly, make sure you understand the information in the box above.
Make sure that the Left Seat Base (3) is oriented as shown. Attach a Seat Base Bumper (31) to the Left Seat Base with an M4 x 16mm
Attach a Bench Foot (15) to the Left Seat Base
(3)with two M4 x 16mm
Repeat this step with the Right Seat Base (2). Make sure that the Right Seat Base is oriented as shown.
1 |
| |
2 |
| |
| 3 | |
| 15 | |
31 | 84 | |
84 | ||
| ||
91 | 91 |
5
