![](/images/new-backgrounds/1322417/32241729x1.webp)
ATTACHING ACCESSORIES
The Lat Bar (55) can be attached to a Cable (61) with a Cable Clip (71). For some exercises the Chain (24) should be attached between the Cable and the Lat Bar with two Cable Clips.
The other accessories can be attached to the Cables (61) in the same manner.
ATTACHING THE BARBELL ADAPTERS
Slide a Barbell Adapter (54) onto the Barbell (51) and secure it in place with an M8 x 10mm Set Screw (62).
Repeat this process on the other side of the Barbell.
ADDING WEIGHT
Slide the desired amount of weight (not included) onto the Weight Carriage (42). Secure the weight with the Spring Clips (72).
Add weight to the Barbell (51) or the Leg Lever (not shown) in the same manner.
Weights can be stored on the Center Rack Base (39) when they are not being used.
WARNING: Always place an equal amount of weight on each side of the Weight Carriage (42) or the Barbell (51). Do not place more than 150 pounds on the Weight Carriage or the Leg Lever (not shown). Do not place more than 310 pounds on the Barbell.
61 |
71 |
24 |
71 |
55 |
62 |
51 |
54 |
Weight |
42 |
72 |
51 |
39 |
15