D-Link DES-3250TG Standalone Layer 2 Switch

Access ID

Type

Offset

forwarded by the Switch, according to any additional rule added (see below).

Type in a unique identifier number for this access. This value can be set from 1 - 50.

Selected profile based on Ethernet (MAC Address), IP address or Packet Content Mask.

Ethernet instructs the Switch to examine the layer 2 part of each packet header.

IP instructs the Switch to examine the IP address in each frame's header.

Packet Content Mask instructs the Switch to examine the packet header.

This field will instruct the Switch to mask the packet header beginning with the offset value specified:

value (0-15)- Enter a value in hex form to mask the packet from the beginning of the packet to the 15th byte.

value (16-31)- Enter a value in hex form to mask the packet from byte 16 to byte 31.

value (32-47)- Enter a value in hex form to mask the packet from byte 32 to byte 47.

value (48-63)- Enter a value in hex form to mask the packet from byte 48 to byte 63.

value (64-79)- Enter a value in hex form to mask the packet from byte 64 to byte 79.

To view the settings of a previously correctly configured rule, click in the Access Rule Table to view the following screen:

95

Page 105
Image 105
D-Link DES-3250TG manual Access ID Type Offset