D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 13. IGMP Snooping Settings window
The following fields can be set:
Parameter | Description |
VLAN ID | Allows the entry of the VLAN ID for which |
| IGMP Snooping is to be configured. |
VLAN Name | Allows the entry of the name of the VLAN |
| for which IGMP Snooping is to be |
| configured. |
Query Interval | Allows the entry of a value between 1 and |
| 65535 seconds, with a default of 125 |
| seconds. This specifies the length of time |
| between sending IGMP queries. |
Max Response Time
Robustness Value
Last Member Query Interval
Sets the maximum amount of time allowed before sending an IGMP response report. A value between 1 and 25 seconds can be entered, with a default of 10 seconds.
A tuning variable to allow for VLANs that are expected to lose a large number of packets. A value between 2 and 255 can be entered, with larger values being specified for VLANs that are expected to lose larger numbers of packets.
Specifies the maximum amount of time between
44
