D-Link DES-3250TG Standalone Layer 2 Switch
Section 8
Management
Security IP
User Accounts
SNMP V3
The
Security IP
Some settings must be entered to allow the switch to be managed from an
To setup the switch for remote management:
Click the Security IP link in the Management menu:
Figure 8- 1. Security IP Management window
Management stations are computers on the network that will be used to manage the switch. You can limit the number of possible management stations by entering up to eight IP addresses. If the eight IP Address fields contain all zeros (“0”), then any station with any IP address can access the switch to manage and configure it. If there is one or more IP addresses entered in the IP Address fields, then only stations with the IP addresses entered will be allowed to access the switch to manage or configure it.
User Accounts
From the Management menu, click User Accounts and then the User Account Management window appears.
