
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 3. Switch Information (Advanced Settings) window
The following fields can be set:
Parameter | Description |
MAC Address Aging | The MAC Address Aging Time specifies the |
Time <300> | length of time a learned MAC Address will |
| remain in the forwarding table without being |
| accessed (that is, how long a learned MAC |
| Address is allowed to remain idle). The Aging |
| Time can be set to any value between 10 and |
| 1,000,000 seconds. |
IGMP Snooping | IGMP Snooping allows the switch to read the |
<Disabled> | Multicast Group IP address and the |
| corresponding MAC address from IGMP |
| packets that pass through the switch. It can be |
| enabled globally by toggling Disabled to |
| Enabled. |
GVRP Status | To enable GVRP on the switch globally, toggle |
<Disabled> | Disabled to Enabled. |
Telnet Status | The Switch can be accessed using Telnet. |
<Disabled> | Toggle Disabled to Enabled. |
Web Status <Disabled> To enable the Web status, toggle Disabled to
| Enabled. |
Link Aggregation | The Link Aggregation Algorithm can be set to |
Algorithm <Mac | one of the following: IP Src & Dest, IP |
Source> | Destination, IP Source, Mac Src & Dest, Mac |
| Destination or Mac Source |
34