D-Link DES-3250TG manual Snmp View Table, 115

D-Link DES-3250TG Standalone Layer 2 Switch

User Name	Type in the new SNMP V3 user name or
	community string for V1 or V2. This can be
	any alphanumeric name of up to 32
	characters that will identify the new SNMP
	user.
Group Name	Type in the new SNMP V3 group name.
	Again, this can be any alphanumeric name of
	up to 32 characters that will identify the
	SNMP group the new SNMP user will be
	associated with.
SNMP Version	From the pull-down menu select:
	V1 – To specifies that SNMP version 1 will
	be used.
	V2 – To specify that SNMP version 2 will be
	used.
	V3 – To specify that the SNMP version 3 will
	be used.

If Encryption (V3 only) is checked configure also:

Auth-Protocol

If Encryption (V3 only) is checked configure also:

In the Space provided, type an alphanumeric sting of between 8 and 20 characters that will be used to authorize the agent to receive packets for the host.

From the pull-down menu select:

MD5 − To specify that the HMAC-MD5-96 authentication level will be used.

SHA − To specify that the HMAC-SHA-96 authentication level will be used.

Priv-Protocol	In the Space provided, type an alphanumeric
	string of between 8 and 16 characters that
	will be used to encrypt the contents of
	messages the host sends to the agent.

SNMP View Table

The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by an SNMP manager.

115