D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 19. Static Multicast Forwarding Settings window
To add a new multicast MAC address to the switch’s forwarding table, click the Add button:
Figure 7- 20. Setup Static Multicast Forwarding Table window
The following fields can be set:
| Parameter | Description | |
| VID | Allows the entry of the VLAN ID of the | |
|
| VLAN the MAC address below is a member | |
|
| of. | |
| Multicast MAC Address Allows the entry of the multicast MAC | ||
|
| address of an end station that will be entered | |
|
| into the switch’s static forwarding table. | |
| Port | Select the port number on which the MAC | |
|
| address entered above resides. | |
| None | Specifies the port as being none. | |
| Egress | Specifies the port as being a source of | |
|
| multicast packets originating from the MAC | |
|
| address specified above. | |
|
|
|
|
54