D-Link DES-3250TG manual Port Description, From and To, State Enabled, Speed/Duplex Auto

D-Link DES-3250TG Standalone Layer 2 Switch

Please note that although the two front panel modules can be used simultaneously, the ports must be different. For example, if port 50x is used on the Mini GBIC module, port 50x is not available on the 1000BASE-T module. In addition, the fiber port will always be the highest priority.

The following fields can be set:

Parameter	Description
From and To	Enter the desired range of ports to be
	configured in these fields.
State <Enabled>	Toggle the State field to either enable or disable
	a given port.
Speed/Duplex <Auto>	Toggle the Speed/Duplex field to either select
	the speed and duplex/half-duplex state of the
	port. Auto – auto-negotiation between 10 and
	100 Mbps devices, full- or half-duplex. The
	Auto setting allows the port to automatically
	determine the fastest settings the device the
	port is connected to can handle, and then to use
	those settings. The other options are
	100M/Full,
	10_auto –auto-negotiation to 10Mbps speed,
	full or half-duplex.
	100M/Half, 10M/Full, and 10M/Half. There is
	no automatic adjustment of port settings with
	any option other than Auto.

Port Description

The Switch supports a port description feature where the user may name various ports on the Switch. To assign names to various ports, click the Port Description on the Configuration menu:

38