D-Link DES-3250TG manual Snmp Host Table, Access Right, 120

D-Link DES-3250TG Standalone Layer 2 Switch

	managers access to MIB objects in the
	switch’s SNMP agent.
View Name	Type an alphanumeric string of up to 32
	characters that is used to identify the group
	of MIB objects that a remote SNMP manager
	is allowed to access on the switch. The view
	name must exist in the SNMP View Table.
Access Right	Use the pull-down menu to select the access
	right:
	Read_Only − Specifies that SNMP
	community members using the community
	string created with this command can only
	read the contents of the MIBs on the switch.
	Read_Write − Specifies that SNMP
	community members using the community
	string created with this command can read
	from and write to the contents of the MIBs
	on the switch.

SNMP Host Table

Use the SNMP Host Table to set up trap recipients.

Figure 8- 13. SNMP Host Table window

To delete an existing entry, click the selection button in the Delete column on the far right that corresponds to the port you want to remove. To create a new entry, click the Add button, a separate window will appear.

Figure 8- 14. SNMP Host Table Configuration window

120