D-Link DES-3250TG manual 118

D-Link DES-3250TG Standalone Layer 2 Switch

Figure 8- 11. SNMP Group Table Display window

The following parameters are used in the SNMP Group Table windows:

Parameter		Description
	Group Name	Type an alphanumeric string of up to 32
		characters. This is used to identify the new
		SNMP group of SNMP users.
	Read View Name	This name is used to specify the SNMP
		group created can request SNMP messages.
	Write View Name	Specify a SNMP group name for users that
		are allowed SNMP write privileges to the
		switch’s SNMP agent.
	Notify View Name	Specify a SNMP group name for users that
		can receive SNMP trap messages generated
		by the switch’s SNMP agent.
	Security Model	Use the pull-down menu to select the SNMP
		version. Select one of the following:
		SNMPv1 – Specifies that SNMP version 1
		will be used.
		SNMPv2 – Specifies that SNMP version 2c
		will be used. The SNMP v2c supports both
		centralized and distributed network
		management strategies. It includes
		improvements in the Structure of
		Management Information (SMI) and adds
		some security features.
		SNMPv3– Specifies that the SNMP version 3
		will be used. SNMP v3 provides secure
		access to devices through a combination of
		authentication and encrypting packets over
		the network.
	Security Level	Use the pull-down menu to select the SNMP
		version:
		NoAuthNoPriv − Specifies that there will be
		no authorization and no encryption of
		packets sent between the switch and a remote

118