D-Link DES-3250TG Standalone Layer 2 Switch
From and To | Ports being configured for 802.1x |
| settings. |
Capability | Two role choices can be selected: |
| Authenticator − A user must pass the |
| authentication process to gain access to |
| the network. |
| None − The port is not controlled by the |
| 802.1x functions. |
Initialize Port(s) for Port Based 802.1x
Existing 802.1x port settings are displayed and can be configured using the window below.
Click Initialize Port(s) on the PAE Access Entity folder on the Configuration menu to open the Initialize Port window:
Figure 7- 68. Initialize Port for Port Based 802.1x window
This window allows you to initialize a port or group of ports. The Initialize Port Table in the bottom half of the window displays the current status of the port(s) once you have clicked Apply.
This window displays the following information:
Parameter | Description |
Port | The port number. |
MAC Address | The MAC address of the switch where |
| the port resides. |
Auth PAE State
Backend_State
Oper Dir
The Authenticator PAE State will display one of the following: Initialize,
Disconnected,Connecting,
Authenticating, Authenticated, Aborting,
Held, ForceAuth, ForceUnauth, and N/A.
The Backend Authentication State will display one of the following: Request, Response, Success, Fail, Timeout, Idle, Initialize, and N/A.
The Operational Controlled Directions are both and in.
PortStatus | The status of the controlled port can be |
| authorized, unauthorized, or N/A. |
|
|
