D-Link DES-3250TG Standalone Layer 2 Switch
SNMP manager.
AuthNoPriv − Specifies that authorization will be required, but there will be no encryption of packets sent between the switch and a remote SNMP manager.
AuthPriv − Specifies that authorization will be required, and that packets sent between the switch and a remote SNMP manger will be encrypted.
SNMP Community Table
Use this table to create an SNMP community string to define the relationship between the SNMP manager and an agent. The community string acts like a password to permit access to the agent on the switch. One or more of the following characteristics can be associated with the community string:
•An Access List of IP addresses of SNMP managers that are permitted to use the community string to gain access to the switch’s SNMP agent.
•An MIB view that defines the subset of all MIB objects that will be accessible to the SNMP community.
•Read/write or
Figure 8- 12. SNMP Community Table Configuration window
To delete an existing entry, click the selection button in the Delete column on the far right that corresponds to the port you want to configure. To create a new entry, configure the parameters as desired in the top part of the window above and click the Apply button. This will add the new string to the SNMP Community Table.
Configure the following for the new SNMP Community entry:
ParameterDescription
Community Name Type an alphanumeric string of up to 32 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP
