D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 49. Access Rule Table (Ethernet)
To remove a previously created rule, select it and click the 
button. To add a new Access Rule, click the Add button:
Figure 7- 50. Access Rule Configuration window (Ethernet)
To set the Access Rule for Ethernet, adjust the following parameters and click Apply.
Parameter | Description | ||
| Profile ID | This is the identifier number for this | |
|
| profile set. | |
| Access ID | Type in a unique identifier number for | |
|
| this access. This value can be set from 1 | |
|
| - 50. |
|
| Mode | Select Permit to specify that the packets | |
|
| that match the access profile are |
|
91
