ATTACHING THE PREACHER CURL PAD
For some exercises, the Preacher Curl Pad (6) must be attached to the weight bench.
Insert the Curl Post (5) into the indicated opening in the Frame (4). Position the Curl Post at the desired height and align one of the holes in the Curl Post with the indicated hole in the Frame. Insert an Adjustment Pin (17) into the holes.
Do not change the amount of weight on your preacher curl bar while the bar is resting on the preacher curl weight rest.
USING THE LEG LEVER
To use the Leg Lever (21), slide the desired amount of weight (not included) onto the Weight Tube (42). If you are using olympic weights, slide the Weight Adapter (20) onto the Weight Tube. Make sure that the Weight Adapter Bushings (19) are in the Weight Adapter.
For some exercises, the Leg Lever (21) must be locked in place. Refer to the inset drawing. To lock the Leg Lever, slide the indicated Foam Pad (11) back from the Leg Lever about one inch. Turn the Leg Lever Lock Pin (37) so that it clips onto the 381mm Pad Tube (13). Slide the Foam Pad back into place.
| 6 |
| 5 |
| 4 |
| Preacher Curl |
17 | Weight Rest |
| |
11 |
|
| 13 |
37 |
|
21 |
|
20 | Weight |
42 |
|
19 |
|
9
