7.Insert the axle of the Roller (27) through the right Link Arm (25); make sure that the Roller is on the inner side of the Link Arm. Attach the Roller with an M10 x 15mm Patch Screw (71) and an M10 x 22mm x 1.5mm Washer (63).
Tip: Use a wrench to hold the axle of the Roller firmly in place while you tighten the Patch Screw into the axle.
Repeat this step to attach the other Roller (27) to the left Link Arm (25).
8.Orient a Pedal (26) as shown. Attach the Pedal to the bracket on the Left Pedal Leg (24) with two M8 x 55mm Patch Bolts (61) and two M8 Hex Nylon Locknuts (77).
Repeat this step to attach the other Pedal (26).
7 |
|
25 |
|
27 |
|
| 25 |
63 | 71 |
8 |
|
26 |
|
61 |
|
24 | 77 |
| |
26 |
|
9
