ProForm PFEL57907.0 user manual Assembly

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included hex keys and your own Phillips screwdriver , adjustable

wrench , and rubber mallet .

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre- assembled. If a part is not in the hardware kit, check to see if it has been preassembled.

		#8 x 1/2"	M4 x 16mm		#8 x 2"
M8 Hex Nylon	M10 x 22mm x	Screw (79)–6	Screw (80)–4		Screw (68)–4
Locknut (77)–4	1.5mm Washer
	(63)–2
M6 x 14mm	M6 x 18mm Patch	M8 x 19mm Patch		M10 x 15mm Patch	M10 x 27mm Patch
Flat Head	Screw (57)–6	Screw (65)–4		Screw (71)–2	Screw (64)–4
Screw (55)–1
	M8 x 55mm Patch			Barrel Nut (56)–1
	Bolt (61)–4
	M10 x 120mm Patch Screw (58)–2
		5