1. | To make assembly easier, read the | 1 |
|
|
| ||
| information on page 5 before you begin |
|
|
| assembling the elliptical exerciser. |
|
|
| While another person lifts the Base (1), attach | 6 | 82 |
| the Front Stabilizer (6) to the Base with two |
|
|
| M10 x 82mm Button Screws (82). |
|
|
| Next, hold the Left and Right Stabilizer Covers | 118 |
|
| (118, 119) around the Base (1). Attach the |
| 119 |
| Stabilizer Covers with six M4 x 16mm Round |
| |
|
|
| |
| Head Screws (101) (only three are shown). |
|
|
|
| 1 | 101 |
|
|
| |
2. Remove the indicated screw and bracket | 2 |
| |
| from the Base (1). Discard the screw and the |
| |
|
|
| |
| bracket. |
|
|
| Next, turn the Base Foot (26) into the Base (1) |
|
|
| as far as possible. |
|
|
|
| 1 | |
|
| Bracket | |
|
| 26 | |
|
| Screw | |
3. Attach the Rear Stabilizer (7) to the Frame (2) | 3 | 83 | |
with two M10 x 127mm Button Screws (83). | |||
| |||
|
| ||
Next, hold the handle on the Frame (2), press |
| 7 | |
the Latch Button (68), and lower the Frame until |
| ||
the Rear Stabilizer (7) is resting on the floor. |
|
| |
|
| Handle | |
|
| 2 | |
|
| 68 | |
| 6 |
|
