HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER
To mount the elliptical exerciser, hold the handlebars and step onto the pedal that is in the lowest position. Next, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note:
The pedal discs can turn in either direction. It is recommended that you turn the pedal discs in the direction shown by the arrow below; however, for variety, you can turn the pedal discs in the oppo- site direction.
Handlebars |
Pedals |
Crank Arm |
To dismount the elliptical exerciser, wait until the ped- als come to a complete stop. IMPORTANT: The ellip- tical exerciser does not have a free wheel; the pedals will continue to move until the flywheel stops. When the pedals are stationary, step off the highest pedal first. Then, step off the lower pedal.
HOW TO ADJUST THE STRIDE OF THE
ELLIPTICAL EXERCISER
To adjust the stride of the elliptical exerciser, first pull one of the adjustment knobs until the adjustment arm pivots freely. Pivot the adjustment arm until the adjust- ment knob is aligned with one of the three holes in the crank arm, and gently release the knob. Then, pivot the adjustment arm back and forth slightly to make sure that the adjustment pin is engaged in one of the three holes in the crank arm.
Adjustment | Holes |
| |
Pin |
|
| Crank Arm |
| Adjustment |
| Knob |
Adjustment |
|
Arm |
|
Adjust the other side of the elliptical exerciser in the same way.
13
