MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the elliptical exerciser regularly. Replace any worn parts immediately.
To clean the elliptical exerciser, use a damp cloth and a small amount of mild soap. Important: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.
BATTERY REPLACEMENT
If the console display becomes dim, the batteries should be replaced; most console problems are the result of low batteries. See assembly step 7 on page 7 for replacement instructions.
HOW TO ELIMINATE FLEXING IN THE CENTER OF THE ELLIPTICAL EXERCISER
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical exerciser rocks slightly on your floor during use, see HOW TO LEVEL THE ELLIPTICAL EXERCISER on page 10.
HANDGRIP PULSE SENSOR TROUBLESHOOTING
• Avoid moving your hands while using the handgrip |
pulse sensor. Excessive movement may interfere |
with heart rate readings. |
• Do not hold the metal contacts too tightly; doing so |
may interfere with heart rate readings. |
• For the most accurate heart rate reading, hold the |
metal contacts for about 30 seconds. |
• For optimal performance of the handgrip pulse sen- |
If the elliptical exer- ciser flexes in the center during use, turn the base foot until the flexing is eliminated.
Base |
Foot |
sor, keep the metal contacts clean. The contacts |
can be cleaned with a soft |
hol, abrasives, or chemicals. |
18
