9.The Console (10) can be operated with four “D” batteries (not included); alkaline batteries are recommended. IMPORTANT: If the ellip- tical exerciser has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the con- sole displays or other electronic compo- nents may become damaged. Remove the battery cover from the back of the Console and insert four batteries into the battery com- partment. Make sure that the batteries are oriented as shown by the diagram inside the battery compartment. Then, reattach the battery cover.
Note: The Console (10) can be also be oper- ated with an optional power supply instead of batteries. To purchase a power supply, call the telephone number on the front cover of this manual. Plug one end of the power supply into the jack on the console. Plug the other end of the power supply into an appro- priate outlet that is properly installed in accor- dance with all local codes and ordinances.
9
10
Battery
Cover
Batteries
10.Have a second person hold the Console (10) near the Upright (2) as shown. Connect the console wire to the Upper Wire Harness (18).
Attach the Console (10) to the Upright (2) with four M4 x 16mm Screws (60). Be careful to avoid pinching the wires.
10
10
Console Wire
18
60
Avoid pinching the
2wires during this step
10