3. Identify the Ramp Axle (74), which is longer | 3 |
|
|
|
than the Pivot Axle (not shown). Apply a gen- |
|
|
| |
|
|
|
| |
erous amount of the included grease to the |
|
|
|
|
Ramp Axle. |
| 90 | 78 |
|
|
|
|
| |
Have a second person hold the Ramp (78) |
|
| 64 | 70 |
near the Frame (1) in the position shown. |
|
| ||
|
| 59 |
| |
Insert the Ramp Axle (74) through the Ramp |
|
|
| |
|
|
|
| |
and the Frame. Tighten an M8 x 25mm Patch |
|
|
|
|
Screw (70), with an M8 Washer (64) and a |
|
|
|
|
Ramp Cover (59), into each end of the Ramp |
|
|
|
|
Axle. |
|
|
|
|
Next, pull the Ramp Pin (90) and align the |
|
|
|
|
Ramp (78) with one of the holes in the Frame |
|
|
|
|
(1). Then, release the Ramp Pin into the |
|
|
|
|
Frame. Make sure that the Ramp Pin is |
|
|
|
|
firmly engaged in the Frame. | 64 | Grease | 1 |
|
| 74 |
|
| |
| 70 |
|
| |
|
|
|
| |
|
| 59 |
|
|
4. Identify the Left Pedal Arm (21), which is | 4 |
|
|
|
marked with a “Left” sticker. |
|
|
| |
|
| 19 |
| |
|
|
|
| |
Attach a Pedal (19) to the Left Pedal Arm (21) |
|
|
|
|
with three M4 x 19mm Screws (68) and three |
|
|
|
|
Star Washers (85). |
|
|
|
|
Repeat this step for the Right Pedal |
|
|
|
|
Arm (not shown). |
|
| 21 |
|
|
| 85 |
|
|
|
| 85 |
|
|
|
| 68 |
|
|
7
