11.Set the console assembly on the Left and Right Uprights (82, 83). Be careful not to pinch any wires. Insert the excess wire into the Right Upright.
Start two 5/16" x 3/4" Bolts (5) with two 5/16" Star Washers (9) into the Right Upright (83). Then, start a 5/16" x 1 1/2" Patch Bolt (4) into the Right Upright. Do not tighten the Bolts yet.
Repeat this step on the left side of the tread- mill.
Firmly tighten the four 5/16" x 3/4" Bolts (5) and the two 5/16" x 1 1/2" Patch Bolts (4).
12.See steps 5, 6, and 9. Tighten all the Patch Bolts used in these steps.
Attach the Left Accessory Tray (101) and the Right Accessory Tray (104) to the console as- sembly with eight #8 x 1/2" Screws (1).
11 | Console Assembly |
|
| |
|
|
|
| 4 |
4 | 9 | 5 | 5 | 9 |
|
|
| ||
| 83 |
|
| 82 |
12 |
| Console Assembly | |
|
| 101 | |
|
| 104 | |
1 |
| 1 | |
1 | 1 | ||
|
12