1.Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (51) so that the treadmill is more stable; do not fully fold the Frame yet.
Remove and discard the two indicated bolts (A) and the shipping bracket (B).
Cut the shipping tie securing the Upright Wire (79) to the Base (86). Use a tie to pull the Upright Wire out of the indicated hole.
Attach a Base Pad (88) to the Base (86) in the location shown with a #8 x 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (88) with only a #8 x 1" Tek Screw (2).
2.Attach a Wheel (87) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Do not overtighten the Nut; the
Wheel must turn freely.
Press a Base Cap (82) into the Base (86).
1 |
| B | A |
|
| ||
| 79 | Hole | 86 |
|
| ||
|
|
| 88 |
|
|
| 2 |
51 | 13 88 2 |
|
|
2 |
| 82 |
|
| |
| 4 | 86 |
|
| |
| 8 | 87 |
|
|
7
