5.With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (51) so the treadmill is more stable; do not fully fold the Frame yet.
Remove and discard the two indicated bolts (A) and the shipping bracket (B).
Attach a Base Pad (88) to the Base (86) in the location shown with a #8 x 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (88) with only a #8 x 1" Tek Screw
(2).
Attach a Wheel (87) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Do not overtighten the Nut; the
Wheel must turn freely.
6.Press a Base Cap (82) into the Base (86). Set the Left Upright Spacer (83) on the Base (86). Hold a Bolt Spacer (80) inside the lower end of the Left Upright (76). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). Set the Left Upright in the Left Upright Spacer.
Partially tighten the 3/8" x 4" Bolts (6); do not fully tighten the Bolts yet.
With the help of a second person, tip the tread- mill so that the Base (86) is flat on the floor.
5 | A |
| B |
|
|
|
|
|
| ||
| 88 |
|
| 51 | 4 |
| 2 |
|
| ||
|
| 8813 |
| ||
| 86 |
| 87 |
| |
|
|
| 2 | 8 | |
|
|
|
| ||
|
|
|
|
| |
6 |
|
| 6 |
|
|
| 82 | 9 |
| 76 |
|
| 83 |
|
| ||
|
|
|
|
| |
| 80 | 86 |
|
|
|
|
|
|
|
|
9
