19
HOW TO USE THE STEREO SOUND SYSTEM
This product has been designed specifically to work
with iPod and has been certified by the developer to
meet Apple performance standards. To play music or
audio books through the consoleʼs stereo speakers,
you must connect your iPod, MP3 player, CD player,
or other personal audio player to the console through
the audio jack or through the music port for iPod. The
music port will charge your iPod while you use it.
To use the audio jack, locate the audio wire and plug it
into the audio jack near the speakers. Then, plug the
audio wire into a jack on your iPod, MP3 player, CD
player, or other personal audio player. Make sure that
the audio wire is fully plugged in.
To use the music port for iPod, you need an iFit
Universal iPod Connector (not included). To purchase
an iFit Universal iPod Connector, please call the
telephone number on the front cover of this man-
ual. Plug one end into the music port near the speaker
and the other end into your iPod. Make sure that the
iFit Universal iPod Connector is fully plugged in.
Next, press the Play button on your iPod, MP3 player,
CD player, or other personal audio player. Adjust the
volume on your personal audio player or press the
Volume increase and decrease buttons on the con-
sole.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
THE INFORMATIONMODE
The console features an information mode that keeps
track of the total distance that the walking belt has
moved and the total number of hours that the treadmill
has been used. The information mode also allows you
to select a measurement system of miles or kilome-
ters, and to turn on and turn off the display demo
mode.
To selectthe information mode, hold down the Stop
button while inserting the key into theconsole and then
releasethe Stop button. When the information mode is
selected,the following information will be shown:
The displaywill show
the totalnumber of
hoursthe treadmill has
beenused.
The displaywill also show the total number of miles or
kilometersthat the walking belt has moved.
The wordENGLISH for miles or METRIC for kilometers
willappear in the display. Press the Speed increase
buttonto change the unit of measurement if desired.
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demomode is turned on, the console will function
normally when you plug in the power cord, switch the
reset/off circuit breaker to the reset position, and insert
the key into the console. However, when you remove
the key, the displays will remain lit, although the but-
tons will not function. If the demo modeis turned on,
the wordON will appear in the display while the infor-
mationmode is selected. To turn on or turn off the demo
mode,press the Speed decreasebutton.
To exitthe information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers hands-free oper-
ation as it tracks your heart rate during your workouts.
To purchase the optional chest pulse sensor, call
the telephone number on the front cover of this
manual.