17
HOW TO USE THE WEIGHT LOSS CENTER
1. Insert the keyinto the console.
See HOWTO TURN ON THE POWER on page 15.
2. Select a calorie goal workout.
To use a calorie goal workout, press the Weight
Loss Center button.
Input your weight, the number of calories you wish
to burn, and the desired workout duration by re-
peatedly pressing the increase or decrease button
next to the Weight Loss Center button. Hold down
the increase or decrease button to rapidly change
your weight or the workout duration. Press the
Enter button after each selection. Note: Once you
have entered your weight, it will be saved in mem-
ory. The profiles on the console represent the
speed settings of the workout.
3. Start the walking belt.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting
and/or incline setting may be programmed for con-
secutive segments.
Tones will sound at the end of each segment. If a
different speed setting and/or incline setting is pro-
grammed for the second segment, the speed set-
ting and/or incline setting will flash in the display for
a moment to alert you. The treadmill will then auto-
matically adjust to the speed and incline settings
for the second segment.
The workout will continue in this way until the last
segment ends. The walking belt will then slow to a
stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the Speed or
Incline buttons; however, when the next segment
begins, the treadmill will automatically adjust to
the speed and incline settings for the next seg-
ment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for the next segment.
4. Select a display mode and monitor your
progress with the display.
When the weight loss center is selected, the con-
sole offers two display modes. Press the Display
button repeatedly to select the desired display
mode. The display can show the following workout
information:
• Workoutinforma-
tion bars that
show your
progress during
the workout.
• Aprofile of the speed settings of the workout.
The arrow below the profile will indicate your
progress.
• Thetime remaining in the workout.
• Thedistance that you have walked or run.
• Theapproximate number of calories you have
burned.
• Theincline level of the treadmill.
• Thespeed of the walking belt.
5. Measure your heart rate if desired.
See step 6 on page 16.
6. When you are finished exercising, remove the
key from the console.
See step 7 on page 16.