Tally Genicom 2150, 2250 manual Error messages via the display, 103

Reference manual Troubleshooting

➤Error messages via the display

➲Load paper from ...

(toggling with Print)

The paper has run out during operation.

1.The printer has been switched on, but no paper has been inserted. In- sert paper in the active sheet feeder.

2.The paper is not fed past the light barrier. Place the paper more to the left.

If the display shows “Online” or “Offline” instead of “Print”, the printer has loaded no paper and there is no print job. It is no error message in this case, actions are not required.

➲ Printhead hot	The printer prints at lower speed.
	No action required. When this message comes up even in a “cold” printer,
	please contact your dealer.
➲ Parity Error	Transmission error from computer to printer via the optional serial interface.

1.Compare the interface configuration of your printer with the settings of your computer (protocol).

2.Check the cable, if necessary replace it.

3.The cable exceeds the maximum allowed length.

BACK	PRINT	?	QUIT
			103