Tally Genicom 2250, 2150 manual Adjust Paperway Menu Char Testmode Off Park, Lf/Ff

Reference manual

Test functions

	Adjust		Paperway
	Menu			Char
1		2	3	4

Testmode Off

	Park			LF/FF
1		2	3	4

Online

Setup

Online

Setup

It is also possible to change to Setup mode when you are in Rolling test mode if you want to change the configuration for the test printout.

To do this, press the key Setup. The printer then changes to Setup mode and the first of the 14 main levels is then displayed.

Program your printer in the usual way for the test printout to change the parameters. See section Programming via the control panel.

Some changes in menu mode may cause the printer to reinitialize; in this case the Rolling ASCII test is aborted.

By pressing the key Setup you exit Setup mode and the printer once again returns to Rolling ASCII test mode test mode.

Testmode Off is displayed. Press the key Online, the test printout starts.

The self-test can be interrupted by pressing the key Online which will stop printing and put the printer into Offline status.

Before you begin printing, you can adjust the paper for the printout with soft keys − and ↓.

BACK	PRINT	?	QUIT
			72