Tally Genicom 2250, 2150 manual Transmission rate, Parity, Data bits Stop bits, 168

Reference manual Interfaces

Add entry to the AUTOEXEC.BAT To use the serial interface of your PC, you must add the following mode commands to the AUTOEXEC.BAT file:

mode com1:9600,n,8,1,p mode lpt1:= com1:

This mode command is only necessary when data is not to be trans- mitted directly to COM1 or another serial interface. It only applies to the default setting of the serial interface of your printer.

Transmission rate:	9600 bauds
Parity:	None
Data bits:	8
Stop bits:	1

These settings must be modified to use other values.

BACK	PRINT	?	QUIT
			168