Tally Genicom 2250, 2150 Paper jam single sheets, Paper does not move to tear off position, 100

Reference manual Troubleshooting

➲Paper jam (single sheets)

Open the top cover and remove the paper manually or with the functions LF (line feed)/FF (form feed) in Offline mode from the printer.

Before you replace the single sheet, refer to the instructions in the section Inserting paper – single sheets.

Pay attention to the following points:

Set single sheet feed to the corresponding paper width.

Insert the paper straight as far as possible.

Adjust the printhead gap to the paper thickness (multiple forms, etc.).

➲Paper does not move to tear off position

Single sheet inserted.

It is only possible to tear off when fanfold paper is used, refer to the sec- tion Moving paper to the tear position.

BACK	PRINT	?	QUIT
			100