ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small parts used in assembly. Assembly requires the included allen wrench and your own phillips screw-

driver , adjustable wrench , and scissors .

1.Refer to the drawing on page 4 and identify the right side of the treadmill. With the help of a second person, carefully lay the treadmill on its right side.

Firmly slide an Extension Leg (59) into one side of the Base (32). Make sure that the Extension Leg is turned so the bracket is on the side shown. Using the Allen Wrench (102), tighten an Extension Leg Screw (57) into the Extension Leg and the Base. Without turning the treadmill over, attach the other Extension Leg in the same manner.

Stand the treadmill upright so that both Extension Legs (59) are resting flat on the floor.

2.Refer to HOW TO LOWER THE TREADMILL FOR USE on page 11. Follow the instructions in step 2 to lower the treadmill.

Cut the plastic ties holding the cage nuts in the upper end of each Handrail (60, 62).

Position the Left Handrail (60) on the left Upright (32) as shown. The bracket on the Extension Leg (59) should be inside of the lower end of the Left Handrail. Thread two Handrail Bolts (30) with a Handrail Washers (31) into the left Upright and the Left Handrail. Do not tighten the Handrail Bolts yet.

While another person holds the Console Base (46), at- tach the Right Handrail (62) in the same way. Be care- ful to avoid damaging the Wire Harness (35).

3.Set the Console Base (46) on the Handrails (60, 62). Route the Wire Harness (35) under the Console Base as shown and then press the Wire Harness up into the Console Base. Insert any slack into the Right Handrail (62).

Attach the Console Base (46) to the Handrails (60, 62) with four Screws (29).

1

 

57

102

 

 

 

32

 

 

 

59

 

 

 

Bracket

 

 

2

 

 

46

 

 

 

35

 

60

30

62

 

 

 

 

 

30

 

 

 

31

 

 

31

 

30

 

30

32

 

 

 

59

 

 

 

3

35

 

 

 

 

46

62

 

 

 

 

 

 

29

60

29

5

Page 5
Image 5
ProForm PFTL58580 user manual Assembly