ProForm PFTL91105.0 user manual HOW to Connect AN Antenna, HOW to Connect a 75 OHM Catv Cable

Models: PFTL91105.0

1 34
Download 34 pages 17.87 Kb
Page 11
Image 11

Before the personal television can be used, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill frame. Note: No antenna, cable, or adapter is included.

HOW TO CONNECT AN ANTENNA

300 Ohm Flat Wire

Indoor Antenna

1.Place a VHF antenna in the desired loca- tion. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter.

Screwdriver

VHF 300

Ohm Flat

Wire

300 to 75 Ohm Adapter

1.See the large drawing near the bottom of this page. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter.

2.Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the power cord.

75 Ohm CATV Cable

1.See the large drawing near the bottom of this page. Connect the 75 ohm CATV cable from the antenna to the 75 ohm antenna terminal on the treadmill frame near the power cord.

2. Push the 300

ohm to 75 ohm

VHF

HOW TO CONNECT A 75 OHM CATV CABLE

adapter onto

the 75 ohm an-

tenna terminal

on the treadmill

frame near the

power cord.

Antenna

300 to 75 Ohm

Adapter

75Ohm Terminal

1.Connect a 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the power cord.

75 Ohm CATV Cable

75 Ohm Terminal

Outdoor Antenna

HOW TO CONNECT A VCR

Note: Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your antenna and the lead-in wiring before connecting the antenna.

Combination

 

VHF/UHF Antennas

 

300 Ohm

 

Flat Wire

 

75 Ohm

75 Ohm

Terminal

CATV Cable

300 to 75

 

Ohm Adapter

 

75 Ohm CATV Cable

1.Connect one end of a 75 ohm CATV cable to the video output jack on your VCR.

2.Plug in the power cord of your VCR. See your VCR user’s manual for proper grounding instructions.

3.Connect the 75 ohm CATV cable to the 75 ohm an- tenna terminal on the treadmill frame near the power cord.

Note: To operate the television with your VCR, make sure that the VCR is turned on, that channel 3 or 4 is se- lected, and that a videocassette is playing.

11

Page 11
Image 11
ProForm PFTL91105.0 user manual HOW to Connect AN Antenna, HOW to Connect a 75 OHM Catv Cable, HOW to Connect a VCR