Promise Technology 4600 Chapter 2: Installation

Chapter 2: Installation

• Unpack your SuperSwap 4600 (below)

• Install the Enclosure (below)

• Install a Disk Drive (page11)

• Remove a Disk Drive (page14)

The SuperSwap 4600 box contains the following items:

There are two phases to install the SuperSwap 4600 into your computer:

• Install the enclosure in your computer cha s s is

• Install a disk drive in the drive carrier

To install the enclosure in your computer chassis, follow these steps:

1. Power down your computer and unplug the power cord.

2. Remove the computer cover.

3. Arrange the drive assemblies to arrange for three contiguous, free 5.25-inc h

drive bays. Remove any bezels covering them.

• SuperSwap Drive Enclosure

• (4) Drive Carriers

•Quick Start Guide

• 3-pin to 3-pin SMBus Cable

(SATA II compliant)

• 6-pin to 6-pin Daisy Chain Cable

• (16) Screws to attach 3.5-inch

disk drives to drive carriers

• (16) Screws to attach 2.5-inch

disk drives to drive carriers

• (8) Screws to mount Enclosure

into PC chassis

• Product CD with User Manual

Warning

SuperSwap 4600, like other parts of your system, is subject to

damage by static electricity. Be sure that you are properly

grounded (Promise recommends that you wear an anti-static strap

or touch a grounded object) and that you unplug your system

before installing SuperSwap 4600 or handling its components.