FastTrak SX4000 Lite
Step 5: Create Your Disk Array
You will now use the onboard FastBuild BIOS utility to create your first array using the attached drives. For an explanation of the array options, see Chapter 3 of the FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual.
Important
Even if you plan to use the Promise Array Management Utility to manage your array, you must still create your first array using the FastBuild Utility, as described here.
1.Boot your system. If this is the first time you have booted with the FastTrak card and drives installed, the Promise onboard BIOS will display the following screen.
FastTrak S150 SX4 (tm) BIOS Version 1.10.02
(c)2002 Promise Technology, Inc. All rights reserved.
Installed DIMM Size: 128 MB
No Array is defined...
Press
<
Press <ESC> to continue booting...
2.Press the
FastBuild Array Utility 2.xx (c)
View Drive | Assignments | [ 1 | ] | |
View/Define Array | [ 2 | ] | ||
Delete Array | [ | 3 | ] | |
Controller | Configuration | [ | 4 | ] |
[ Keys Available ] |
|
Press 1..4 to Select Option | [ESC]..Exit |
3.Press 2 on the Main Menu screen to display, the Define Array Menu appears (below).
8
