Motorola IHF1000, 6840420Z01-AD manual Installing the Microphone, Inspect all connections

IHF1000 System Diagram

User Interface Module

(UIM)

3 Connect the RED positive battery lead to a point in the

vehicle’s fuse box that is fused at 5 amp.

IHF1000

Module

* If Supported in Vehicle

Interface

Cable

Speaker + (Purple)

Speaker - (Gray)

Line Audio + (Orange)

Line Audio - (Blue)

Radio Mute (Yellow)

VBATT (Red)

FUSE

Ground (Black)

Ignition (Green)

FUSE

Microphone

Speaker*

To Adapter/ Vehicle*

Installing the Handsfree Kit

Installing the Handsfree Kit

4	Connect the BLACK ground wire to the vehicle chassis.
5	Inspect all connections.

Note: The ORANGE and BLUE wires are not used. (These wires are used to connect the line-level audio to the vehicle radio, if the radio supports this feature.)

Note: The system's handsfree audio has been optimized for the external speaker. Routing the audio output through the vehicle's entertainment system may alter the handsfree audio performance.

Installing the Microphone

Note: The microphone MUST BE positioned properly or this product WILL NOT perform optimally.

Note: See “Power Connections” on page 49 for more information.

1Connect the GREEN Ignition Sense wire to an ignition-switched location on the fuse block. When the ignition is off, the ignition sense line is low.

2Connect the YELLOW Entertainment Mute Wire to the vehicle’s entertainment system.

Note: This feature is only operational if the vehicle’s radio supports this capability. Installation may require an optional relay (not included). The mute line is an active low signal.

13

14

1Attach 1 side of the

VELCRO® tape to the bottom side of the microphone.

2 Securely mount the

microphone on the
overhead console or
headliner between the	16in/40cm
driver and passenger. DO

NOT mount on the visor or windshield. Vibrations

will negatively impact audio and speech recognition performance.