Placing a Call with the Car Kit
To place a call, you must first establish a Bluetooth® link between the car kit and your phone (see page 22).
You can place a call with the car kit in these ways:
•Dial a number from the phone.
•Digit dial with Speech recognition.
•Use the system’s Contact List.
•Speak a phone voice tag [phone voice name].
•Use the Speed Dial command.
•Use the Redial command.
•Use last number redial from the User Interface Module.
When connected, all of these calls are handsfree. You can terminate a SR session at any time by pressing the END button.
Placing a Call with Speech recognition
You can enter a phone number as 1 or more segments of digits. A segment can include up to 15 digits. An entire number can include no more than 32 digits. You can begin the number set with the * or # character.
Note: Speak numbers as continuous digits. For example, dictate
“5-5-5-twenty-two-eleven.”
Using Your Car Kit
27
Using Your Car Kit
28
Calling with a Whole Number
Action
1Press the TALK button.
2When prompted, say “Dial Number.” The system responds: Number please?.
3Dictate the phone number as a single set of digits (without pauses between digits).
The system recites the digits heard.
4If the number recited by the system is correct, say “Dial.” The system responds: Dialing.
Calling with Digit Segments
Action
1Press the TALK button.
2When prompted, say “Dial Number.” The system responds: Number please?.
3Dictate the first segment of digits. (For example, say the 1st 3 numbers.)
The system recites the digits heard.
4Dictate the next segment of digits. The system recites the digits heard.
Repeat this step until you enter the complete phone number.
5When the complete number is recited by the system, say “Dial.” The system responds: Dialing.
