•Locate the microphone no more than 16 inches
(40 cm) from the driver's mouth and out of direct air flow from vent or defrost.
•Aim the microphone directly toward the driver. The front of the mic should point toward the driver. The wire comes out the back of the mic.
•Do not allow anything (such as a
•Mount the microphone firmly so that vibrations do not affect audio quality.
Caution: The location of the microphone MUST NOT interfere with the vehicle’s air bag deployment.
3Connect the microphone to the interface cable.
Installing the External Speaker
Note: Always use the supplied mounting hardware.
1 Securely mount the speaker in the passenger footwell, either to the transmission hump (center console) or beneath
the dash. Position the speaker so that it does not directly face the microphone and does not interfere with either the passenger or automobile seat.
Caution: The location of the external speaker MUST NOT interfere with the vehicle’s air bag deployment.
2Connect the speaker to the electronic module.
Installing the Handsfree Kit
15
Installing the Handsfree Kit
16
Installing the User Interface Module
1Remove the backing of the
tape on the bottom of the User Interface Module (UIM).
2Select a suitable location on the vehicle dash, within easy
reach of the driver, and mount the UIM. The UIM can be mounted anywhere on the dash.
Caution: The location of the UIM MUST NOT interfere with the vehicle’s air bag deployment.
Caution: The mounted UIM MUST NOT create a visual distraction.
Caution: DO NOT mount the UIM on the steering wheel.
3Connect the UIM to the interface cable.
