Call Waiting
When you are on a call, an audible beep signals a 2nd call.
Action
Press and release the ANSWER button to place the 1st call on hold and answer the incoming call.
Each time you press and release the ANSWER button, you toggle between active calls.
Note: If the ANSWER button is not pressed, the incoming call is automatically rejected and sent to voicemail (if set up on the phone).
Sending DTMF Tones
You can send DTMF tones from the phone keypad, or by using the Enter command:
Action
1Press the TALK button.
2When prompted, say “Enter <digits>” to send numbers as DTMF tones.
Using Your Car Kit
35
Using Your Car Kit
36
Managing the Contact List
You can store a list of names and phone numbers in your car kit’s contact list. The list can include up to 20 entries.
Adding an Entry
Action
1Press the TALK button.
2When prompted, say “Contact List.”
3If the system responds: Contact list is empty. Do you wish to add a contact?, say “Yes.”
or
If the system responds: Contact list. Please say a command, say “Add Contact.”
4When the system responds: Please say the name, recite the contact to be stored.
If an error is detected, the system asks you to try again.
If it accepts the name, the system responds: Please say the number for <contact>.
5Dictate the phone number as an entire number (without pauses between digits).
or
Dictate the number as a series of segments (for example, say the 1st 3 digits, then the next 3, etc.), until you have dictated the entire number.
The system repeats the number it heard.
