PSC 4400 Series manual Inserting/Removing, Inserting the 4400 in the Dock

Mounting Options

Figure 9. Installing the Vehicle Dock Assembly on the Mount

Ram Ball
Ram Ball	Adjustment
Assembly	Knob

2.Loosen the Adjustment Knob slightly to tilt the Vehicle Dock to the desired mounting angle. Re-tighten the Adjustment Knob securely.

3.Route and connect all cables (see “Power and Peripheral Device Connec- tions” starting on page 19 for more on connections). If you haven’t already prepared the power connection, reference “Electrical Consider- ations” starting on page 5 for wiring information.

Inserting/Removing the 4400

Inserting the 4400 in the Dock

To insert a 4400 terminal into the Powered Vehicle Dock, perform the follow- ing steps:

1.Slide the Falcon up under the top of the Powered Vehicle Dock.

2.Push upwards to lift the spring-loaded top to allow insertion of the Fal- con as shown in Figure 10 on page 15.

14 Falcon® 4400 Series Powered Vehicle Dock