My alarm/timer didn’t work
Check that you set the alarm or timer on (If display mode is set to clock you will see a timer or alarm icon on the display).
Check that the station you are tuned to is available – the clock/alarm/timer relies on the time signal broadcast by the multiplexes.
If you are using
Clock shows the wrong time
This may happen if the multiplex you are tuned to broadcasts an incorrect time signal, try tuning to a station in another multiplex.
None of the buttons seem to work
If the display is on but most buttons seem not to work your 
) on screen.
I can’t see my clock in the dark
Tap or hold (full brightness) the SnoozeHandle to illuminate the display if your unit is in standby or set your display backlight on for permanent illumination.
Resetting your radio
Resetting your radio removes all presets, stored stations and favourite station settings and resets all options to defaults. To select the reset option:
1.Press and hold the Menu button for more than two seconds. The display will show ‘Press Tune to confirm reset’. Release the Menu button.
2.Press the Tune knob to confirm the reset or press no buttons to cancel the reset.
19
