TURBOPOWER 99WATER HEATER

8.5Horizontal and Vertical Venting Through a Wall or Roof

Vent terminal locations, clearances, warnings and requirements stated in this manual apply, whether combustion air comes from the room or is ducted from outdoors.

1.The solid PVC or CPVC vent pipe must be sealed to the wall or roof at the point where it passes through the wall or roof.

2.The vent must be terminated with the vent termination cap provided by PVI.

3.The vent terminal must have a minimum clearance of 4 feet (1.22 m) horizontally from, and in no case be located above or below, electric meters, gas meters, regulators and relief equipment.

4.The vent cap shall terminate at least 3 feet (0.91 m) above any forced air inlet within 10 feet (3.05 m).

5.The vent shall terminate at least 4 feet (1.22 m) below, 4 feet (1.22 m) horizontally from or 1 foot (0.3 m) above any door, window or building air inlet to the building.

6.The vent system shall terminate at least 1 foot (0.3 m) above grade and at least 1 foot (0.3m) above possible snow accumulation levels and shall terminate at least 7 feet (2.13 m) above grade when located adjacent to public walkways or gathering areas.

7.To avoid a blocked flue condition, keep the vent cap clear of snow, ice, leaves, debris, etc.

8.The vent must not exit over a public walkway, near soffit vents or crawl space vents or other areas where condensate or vapor could create a nuisance or hazard or cause property or could be detrimental to the operation of regulators, relief valves or other equipment.

9.A horizontal vent must extend at least one foot beyond the wall.

10.A horizontal vent terminal must not be installed closer than 3 feet (0.91m) from an inside corner of an L- shaped structure.

11.A vertical vent should exhaust outside the building at least 2 feet (0.61 m) above the highest point of the roof within a 10-foot (3.05 m) radius of the termination.

12.The vertical termination must be a minimum of 3 feet (0.91 m) above the point of exit. A vertical termination less than 10 feet (0.91 m) from a parapet wall must be a minimum of 2 feet (0.61 m) higher than the parapet wall.

13.Follow all requirements in the “Venting” sections of this manual and other instructions and markings for venting flue products to the outdoors, obtaining adequate combustion and ventilation air and general installation instructions.

11

PV500-12 08/12

Page 10 Page 12
Page 11
Image 11
PVI Industries PV500-12 manual Horizontal and Vertical Venting Through a Wall or Roof
Page 10 Page 12

PV500-12 specifications

PVI Industries has established itself as a leader in innovative power generation solutions, and the PV500-12 is a prime example of its cutting-edge technology. Designed for heavy-duty applications, the PV500-12 is a versatile power generator that excels in various sectors, including construction, agriculture, and emergency power supply.

At the core of the PV500-12 is its robust engine, delivering impressive performance and reliability. With a rated output of 500 kVA, this generator can handle significant electrical loads, making it suitable for demanding environments. The engine is engineered for efficiency, ensuring lower fuel consumption while maximizing output. This is a crucial feature as it translates into reduced operating costs and a lower environmental impact, aligning with the growing emphasis on sustainability in power generation.

One of the standout features of the PV500-12 is its advanced control system. Equipped with a user-friendly digital control panel, operators can easily monitor and manage performance metrics, including voltage, frequency, and engine parameters. The integration of remote monitoring capabilities further enhances operational efficiency, allowing for real-time diagnostics and performance tracking from a distance. This feature is particularly beneficial for businesses that require constant power supply and need to ensure their systems are functioning optimally.

The generator is designed with durability in mind, featuring a heavy-duty construction that can withstand harsh operating conditions. Its weatherproof enclosure protects internal components from the elements, making it suitable for outdoor installations. Additionally, the PV500-12 is equipped with advanced noise reduction technologies, ensuring quieter operation compared to traditional generators. This makes it an ideal choice for urban environments or noise-sensitive applications.

In terms of fuel options, the PV500-12 offers flexibility, supporting both diesel and natural gas configurations. This versatility allows users to select the most economical and practical fuel source for their specific needs. The generator's maintenance features have also been streamlined, with easy access points for routine servicing, helping to minimize downtime and keep operations running smoothly.

Overall, the PVI Industries PV500-12 stands out as a robust, efficient, and technologically advanced power generation solution. Its combination of high performance, durability, and user-friendly features make it a valuable asset for various industrial applications. As industries continue to evolve, the PV500-12 positions itself as a reliable partner in meeting the ever-growing demand for dependable power solutions.
Top Page Image Contents