Manuals / PVI Industries / Household Appliance / Water Heater

PVI Industries PV500-12 manual Standard Features and Equipment, Water Heater Installation

Models: PV500-12

1 26
Download 26 pages 55.63 Kb
Page 6
Image 6

TURBOPOWER 99WATER HEATER

3STANDARD FEATURES AND EQUIPMENT

3.1 Warranty

Factory warranty does not cover improper installation or operation. (See warranty for complete details). Warranty exclusions include but are not limited to failure or malfunctions resulting from:

1.Failures to properly apply, install, operate, or maintain the appliance in accordance to printed instructions.

2.Abuse, alteration, accident, fire, flood and the like.

3.Sediment or lime buildup, freezing or any other conditions causing inadequate circulation.

4.Corrosive or contaminated atmosphere.

4 WATER HEATER INSTALLATION

4.1Checking Equipment Before You Install

Inspect the unit completely upon receipt from the freight carrier before signing the bill of lading. Inspect the appliance and all accompanying parts for signs of impact or mishandling. Verify the total number of pieces shown on packing slips with those actually received. Contact the freight carrier immediately if any damage or shortage is detected.

4.2Codes

The equipment shall be installed in accordance with those installation regulations in force in the local area where the installation is to be made. These shall be carefully followed in all cases. Authorities having jurisdiction shall be consulted before installation is made. In the absence of such requirements, the installation shall conform to the latest edition of the National Fuel Gas Code, ANSI Z223.1. Where required by the authority having jurisdiction, the installation must conform to American Society of Mechanical Engineers Safety Code for Controls and Safety Devices for Automatically Fired Boilers, No. (CSD-1). All appliances conform to the applicable sections of the latest edition of ASME Boiler and Pressure Vessel Code, Section IV. Where required by the Canadian authority having jurisdiction, the installation must comply with CAN/CSA B149 and/or B149.2 and/or provincial regulations.

4.3Electrical Requirements

WARNING: Turn off all electrical service to the appliance when accessing the controls located inside the control cabinet. The cabinet contains high voltage wiring and terminals. If the electrical service is not turned off and these wires or terminals are touched, a dangerous shock causing personal injury or loss of life could occur. Close the control cabinet before restoring electrical service to the appliance.

See product specification sheets and/or appliance labeling for branch service requirements. The appliance, when installed, must be electrically grounded in accordance with the requirements of the authority having jurisdiction or in the absence of such requirements, with the latest edition of the National Electrical Code ANSI/NFPA No. 70. When the unit is installed in Canada, it must conform to the CSA C22.1, Canadian Electrical Code, Part 1 and/or Local Electrical Codes.

1.All wiring between the unit and field installed devices must be made with type T wire.

2.Line voltage wire exterior to the appliance must be enclosed in approved conduit or approved metal clad cable.

3.To avoid serious damage, DO NOT energize the unit until the system and appliance is full of water.

4.4Location

These units are suitable for indoor installation only.

1.Locate the unit so that if water connections should leak, water damage will not occur. When such locations are unavoidable, install a suitable drain pan, and plumb pan to ensure adequate drainage in the event of a leak. Under no circumstances is the manufacturer responsible for water damage in connection with this unit, or any of its components. The manufacturer’s warranty does not cover water damage.

2.Protect associated electrical components and electrical connections from water (dripping, spraying, rain, etc.) during appliance operation and service.

6

PV500-12 08/12

Page 5 Page 7
Page 6
Image 6
PVI Industries PV500-12 manual Standard Features and Equipment, Water Heater Installation
Page 5 Page 7

PV500-12 specifications

PVI Industries has established itself as a leader in innovative power generation solutions, and the PV500-12 is a prime example of its cutting-edge technology. Designed for heavy-duty applications, the PV500-12 is a versatile power generator that excels in various sectors, including construction, agriculture, and emergency power supply.

At the core of the PV500-12 is its robust engine, delivering impressive performance and reliability. With a rated output of 500 kVA, this generator can handle significant electrical loads, making it suitable for demanding environments. The engine is engineered for efficiency, ensuring lower fuel consumption while maximizing output. This is a crucial feature as it translates into reduced operating costs and a lower environmental impact, aligning with the growing emphasis on sustainability in power generation.

One of the standout features of the PV500-12 is its advanced control system. Equipped with a user-friendly digital control panel, operators can easily monitor and manage performance metrics, including voltage, frequency, and engine parameters. The integration of remote monitoring capabilities further enhances operational efficiency, allowing for real-time diagnostics and performance tracking from a distance. This feature is particularly beneficial for businesses that require constant power supply and need to ensure their systems are functioning optimally.

The generator is designed with durability in mind, featuring a heavy-duty construction that can withstand harsh operating conditions. Its weatherproof enclosure protects internal components from the elements, making it suitable for outdoor installations. Additionally, the PV500-12 is equipped with advanced noise reduction technologies, ensuring quieter operation compared to traditional generators. This makes it an ideal choice for urban environments or noise-sensitive applications.

In terms of fuel options, the PV500-12 offers flexibility, supporting both diesel and natural gas configurations. This versatility allows users to select the most economical and practical fuel source for their specific needs. The generator's maintenance features have also been streamlined, with easy access points for routine servicing, helping to minimize downtime and keep operations running smoothly.

Overall, the PVI Industries PV500-12 stands out as a robust, efficient, and technologically advanced power generation solution. Its combination of high performance, durability, and user-friendly features make it a valuable asset for various industrial applications. As industries continue to evolve, the PV500-12 positions itself as a reliable partner in meeting the ever-growing demand for dependable power solutions.