Setup Manual
BACnet Protocol Gateway for TempTrac® and
XR10CX Water Heater Control
When a BAS interface with Temptrac or the XR10CX requires a protocol other than the standard Modbus RTU for Temptrac and XR10CX, PVI Industries offers a premapped gateway from FieldServer Technologies. The ProtoCessor ProtoNode RER currently supports BACnet IP or MSTP. Consult factory for other protocols.
This manual is meant to be a general overview of the application of this gateway, for additional information please visit: www.protocessor.com or contact FieldServer Technologies at 800‐317‐8319 Email: sales@protocessor.com for technical assistance. The ProtoCessor ProtoNode can be user configured with the following specifics: IP address, serial address, baud rate and one of three register profiles.
HARDWARE DISCRIPTION
RS‐485 port for Host or Field serial protocol support
Voltage selection jumper
Ethernet port for Diagnostics and Host or Field Protocol support
Dip switches
6 Pin RS‐485 +/‐ and FG Power +/‐ and FG 5Vdc, 9‐30 Vac or Vdc
PVI Industries, LLC P.O. Box 7124 Ft. Worth, TX 76111 1‐800‐433‐5654 | ||
Page 1 | 7/10 |